5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual 29
12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Figure 16
Figure 16 Connect the Option
13.
Connect the ground wire at the option ground terminal. Tighten the screw to 0.5 to
0.6 Nm or (4.4 to 5.3 in lbs) using an M3 Phillips screwdriver.
Figure 17
Figure 17 Connect the Ground Wire to the Option
Line up tabs
Line up tabs
Option ground
terminal
To Next Page
Loading...
