Need help?Do you have a question about the YASKAWA V7 and is the answer not in the manual?
General| Model | V7 |
|---|---|
| Category | Controller |
| Manufacturer | Yaskawa |
| Output Frequency | 0.1 to 400 Hz |
| Type | AC Drive |
| Horsepower | 0.5 to 300 HP |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Communication Interfaces | DeviceNet, Profibus, Ethernet |
| Operating Temperature | -10°C to 50°C |
| Humidity | 5% to 95% (non-condensing) |
| Enclosure Rating | IP20 |
| Voltage Class | 200V, 400V |
| Storage Temperature | -20°C to 65°C |
Covers warnings, cautions, and important handling instructions for safe operation and maintenance of the drive.
Details on using the digital operator and illustrates various drive configuration examples for startup.
Instructions for connecting main circuit, control circuit, grounding, and auxiliary devices for proper electrical installation.
Step-by-step guides for configuring the drive using Open Loop Vector or V/f control methods.
Procedures for running the motor under load after initial setup, including safety checks and control methods.
Explains the digital operator's keys, function LEDs, status indicators, and monitor displays for user interaction.
Details on programmable features like accel/decel, S-curve, carrier frequency, auto-restart, and various control methods.
Lists alarm and fault displays, their explanations, and corrective actions for diagnosing and resolving drive issues.
To Next Page