YASKAWA ELECTRIC TOBP C730600 60C V1000 Option SI-EN3/V Installation Manual 9
2 Overview
2 Overview
The option provides a communications connection between the drive and an ODVA
EtherNet/IP network. The option connects the drive to an EtherNet/IP network and
facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
EtherNet/IP is a communications link to connect industrial devices (such as smart motor
controllers, operator interfaces, and variable frequency drives) as well as control devices
(such as programmable controllers and computers) to a network. EtherNet/IP is a simple,
networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.
EtherNet/IP is an open device network standard.
Install the option/EtherNet/IP option on a drive to perform the following functions from a
EtherNet/IP master device:
• Operate the drive
• Monitor the drive operation status
• Change drive parameter settings
To Next Page
Loading...
