Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
x
locate the specific parameter in the CFG file.
For example, if you want to enable the auto answer feature for account 1, you need to locate
the
account.1.auto_answer
in the MAC.cfg file and then configure it as required (e.g.,
account.1.auto_answer = 1). If you want to configure the SIP server 1 for account 1, you can
locate the
account.1.sip_server.1.address
in the MAC.cfg file and configure it as required (e.g.,
account.1.sip_server.1.address = 10.2.1.48).
The following shows a segment of MAC.cfg file:
Method 2: Web User Interface
As described in the chapter Summary Table Format, you can directly navigate to the specified
webpage to configure the feature. You can also first log into the web user interface, and then
locate the feature field according to the web path (e.g., Account->Basic->Auto Answer) to
configure it as required.
To Next Page
Loading...
Need help?
General