Configuring Security Features
931
Pre-
dialing/Di
aling
screen
Allow Behavior: You are allowed to press
the Line Key (key type is Line), input or
modify numbers, dial emergency
numbers and return to idle screen.
Keys not Locked: IME, More, Cancel,
Send, Delete and Line soft key; line key
(key type is Line), X, OK/√, Volume key,
Speakerphone key, digit keys, HEADSET
key, “*”/”#” (key as send), off-hook key
and on-hook key.
Note: Line key is not applicable to SIP-
T19(P) E2/CP860/CP920 IP phones. X,
HEADSET and Speakerphone key are not
applicable to CP860/CP920 IP phones.
Off-hook key and on-hook key are only
applicable to CP860/CP920 IP phones.
The same as All
Keys, but you
can dial any
number.
The Menu
key (key type
is Menu) is
locked.
Allow Behavior: You are allowed to end
the call, initiate a new call to dial the
emergency number and resume a call.
Keys not Locked: EndCall, Cancel,
Resume, NewCall soft key; line key (key
type is Line), digit keys, X, Volume key,
HEADSET key, Speakerphone key, off-
hook key and on-hook key.
Note: Pressing X key to end the call are
not applicable to SIP-T23P/T23G/T21(P)
E2/T19(P) E2 and CP860/CP920 IP
phones. Line key is not applicable to SIP-
T19(P) E2 and CP860/CP920 IP phones.
HEADSET and Speakerphone key is not
applicable to CP860/CP920 IP phones.
Off-hook key and on-hook key are only
applicable to CP860/CP920 IP phones.
The same as All
Keys, but you
can dial any
number.
The Menu
key (key type
is Menu) is
locked.
Phone Lock Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 1014.
To Next Page
Loading...
Need help?
General