Configuring Audio Features
879
3. Select the desired value from the pull-down list of PTime(ms).
4. Click Confirm to accept the change.
Acoustic Clarity Technology
Acoustic Echo Cancellation (AEC)
Acoustic Echo Cancellation (AEC) is used to reduce acoustic echo from a voice call to provide
natural full-duplex communication patterns. It also increases the capacity achieved through
silence suppression by preventing echo from traveling across a network. IP phones employ
advanced AEC for hands-free operation. AEC is not normally required for calls via the handset.
In certain situation, where echo is experienced by the remote party, AEC may be used to
reduce/avoid echo when the user uses the handset.
Note
Procedure
AEC can be configured using the following methods.
Utilizing acoustic echo cancellation will introduce a small delay increase into audio path which
might cause a lower voice quality.
To Next Page
Loading...
