Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
214
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the page icons appear only if a line key not located on the first
page is assigned functionality. Then you can use the line key in the bottom right to switch
pages.
Note: It is only applicable to SIP-
T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP phones.
Web User Interface:
None
Phone User Interface:
None
Enable Page Tips
Enable page tips feature allows users to enable the page icon and page switch key LED on the
phone to indicate different statuses. It is mainly used in the scenario of configuring multi-page
line key. It is only applicable to SIP-
T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP phones.
The following shows the page icons:
The following table lists the page icons to indicate different statuses:
SIP-T54S/T52S/T46G/T46S/T29G
Fast-flashing: the BLF monitored user
receives an incoming call on the non-
current page.
Solid: there is a parked call to the line
on the non-current page.
Fast-flashing: the line receives an
incoming call on the non-current
To Next Page
Loading...
Need help?
General