EasyManuals Logo

Yealink SIP-T21 E2 Administrator's Guide

Yealink SIP-T21 E2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #339 background imageLoading...
Page #339 background image
Configuring Basic Features
313
Parameters
Permitted Values
Default
Note: Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P)
E2/CP860/CP920 IP phones. It works only if the values of the parameters
“dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Area Code->Account
Phone User Interface:
None
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15) fields.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the area code rule will apply to all accounts on the
IP phone.
4. Click Confirm to accept the change.
Block Out
Block out rule prevents users from dialing out specific numbers. When entered numbers match
the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP phones support
up to 10 block out rules.
Procedure
Block out rule can be created using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Create the block out rule for the IP
phone.
Parameters:
dialplan.block_out.number.X
dialplan.block_out.line_id.X

Table of Contents

Other manuals for Yealink SIP-T21 E2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T21 E2 and is the answer not in the manual?

Yealink SIP-T21 E2 Specifications

General IconGeneral
BrandYealink
ModelSIP-T21 E2
CategoryIP Phone
LanguageEnglish

Related product manuals