Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
974
Parameters
Permitted
Values
Defa
ult
Description:
Configures the format type of the log messages exported to the syslog server.
0-module name [pid]: internal-module-name <log_level> syslog_msg
1-<PRI>DEVICE_NAME [mac-address] [version] time module name [pid]: internal-module-
name <log_level> syslog_msg
If it is set to 0, an example of the syslog message: Log [2928]: BSUI <6+info >
FlickGestureRec
If it is set to 1, an example of the syslog message: <134>YEALINK-T46G [00:10:99:09:F6:16]
[28.81.0.40] Jun 17 00:00:13 Log [2928]: BSUI <6+info > FlickGestureRec
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
None
Phone User Interface:
None
static.syslog.server
IP address
or domain
name
Blan
k
Description:
Configures the IP address or domain name of the syslog server.
Example:
static.syslog.server = 192.168.1.100
Web User Interface:
Settings->Configuration->Syslog Server
Phone User Interface:
None
static.syslog.server_port
Integer
from 1 to
65535
514
Description:
Configures the port of the syslog server.
Example:
static.syslog.port = 515
Web User Interface:
Settings->Configuration->Port