EasyManua.ls Logo

Yealink SIP-T21 E2

Yealink SIP-T21 E2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
999
The NOTIFY message is formed as shown:
NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
CSeq: 10 NOTIFY
Call-ID: 1234@<srchost>
Event: check-sync;reboot=true
Procedure
Changes can only be configured using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the IP phone behavior
when receiving a SIP NOTIFY
message which contains the
header “Event: check-sync”.
Parameter:
sip.notify_reboot_enable
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
sip.notify_reboot_enable
0, 1 or 2
1
Description:
Configure the IP phone behavior when receiving a SIP NOTIFY message which contains the
header “Event: check-sync”.
0-The IP phone will reboot only if the SIP NOTIFY message contains an additional string
“reboot=true”.
1-The IP phone will be forced to reboot.
2-The IP phone will ignore the SIP NOTIFY message.
Web User Interface:
None
Phone User Interface:
None
How to reboot the IP phone via web/phone user interface?
You can reboot your IP phone via web/phone user interface.

Table of Contents

Other manuals for Yealink SIP-T21 E2

Related product manuals