EasyManuals Logo

Yealink SIP-T21 E2 Administrator's Guide

Yealink SIP-T21 E2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Setting Up Your System
87
Parameters
Permitted Values
Default
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Active
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN->DHCP
VLAN
static.network.vlan.dhcp_option
Integer from 1 to 255
132
Description:
Configures the DHCP option from which the IP phone will obtain the VLAN settings. You
can configure at most five DHCP options and separate them by commas.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN->Option
To configure DHCP VLAN discovery via web user interface:
1. Click on Network->Advanced.
2. In the DHCP VLAN block, select the desired value from the pull-down list of Active.
3. Enter the desired option in the Option (1-255) field.
4. Click Confirm to accept the change.

Table of Contents

Other manuals for Yealink SIP-T21 E2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T21 E2 and is the answer not in the manual?

Yealink SIP-T21 E2 Specifications

General IconGeneral
BrandYealink
ModelSIP-T21 E2
CategoryIP Phone
LanguageEnglish

Related product manuals