EasyManua.ls Logo

Yealink SIP-T21 E2

Yealink SIP-T21 E2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
176
Parameters
Permitted
Values
Default
None
phone_setting.missed_call_power_led_flash.enable
0 or 1
1
Description:
Enables or disables the power indicator LED to flash when the IP phone misses a call.
For SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T
27G/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slowly flashes (1000ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED slowly flashes (1000ms) yellow)
Note: It is not applicable to CP860/CP920 IP phones.
Web User Interface:
Features->Power LED->MissCall Power Light Flash
Phone User Interface:
None
To configure the power Indicator LED via web user interface:
1. Click on Features->Power LED.
2. Select the desired value from the pull-down list of Common Power Light On.
3. Select the desired value from the pull-down list of Ringing Power Light Flash.
4. Select the desired value from the pull-down list of Voice/Text Mail Power Light Flash.
5. Select the desired value from the pull-down list of Mute Power Light Flash.
6. Select the desired value from the pull-down list of Hold/Held Power Light Flash.
7. Select the desired value from the pull-down list of Talk/Dial Power Light On.

Table of Contents

Other manuals for Yealink SIP-T21 E2

Related product manuals