Yealink SIP-T21 E2

Configuring Basic Features
179
Parameters
Permitted
Values
Default
Enables or disables the IP phone to display the pop-up message box when it forwards an
incoming call to other party.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Forward Call Popup
Phone User Interface:
None
features.text_message_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it receives a new
text message.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.text_message.enable” is set to 1
(Enabled). It is not applicable to CP920 IP phones.
Web User Interface:
Features->Notification Popups->Display Text Message Popup
Phone User Interface:
None
To configure the notification popups via web user interface:
1. Click on Features->Notification Popups.
2. Select the desired value from the pull-down list of Display Voice Mail Popup.
3. Select the desired value from the pull-down list of Display Missed Call Popup.
4. Select the desired value from the pull-down list of Display Forward Call Popup.