Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
232
4. Enter the desired value in Label, Display Name, Register Name, User Name, Password and
SIP Server1/2 field respectively.
5. If you use outbound proxy servers, do the following:
1) Select Enabled from the pull-down list of Enable Outbound Proxy Server.
2) Enter the desired IP address or domain name in the Outbound Proxy Server 1/2
field and the desired port of the outbound proxy server 1/2 in the Port field
respectively.
6. Click Confirm to accept the change.
To configure the interval for re-register when registration fails via web user interface:
1. Click Account->Advanced.
2. Select the desired account from the pull-down list of Account.
To Next Page
Loading...
