Yealink SIP-T21 E2 Administrator's Guide

Configuring Basic Features
237
Configure whether to set up a conference
call using a new line key on a per-line
basis.
Parameter:
account.X.phone_setting.call_appearance.
conference_via_new_linekey
Web User Interface
Configure auto linekeys.
Navigate to:
http://<phoneIPAddress>/servlet?p=feat
ures-general&q=load
Configure the number of DSS keys to be
assigned automatically.
Navigate to:
http://<phoneIPAddress>/servlet?p=acco
unt-adv&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.auto_linekeys.enable
0 or 1
0
Description:
Enables or disables the DSS keys to be assigned with Line type automatically.
0-Disabled
1-Enabled
Note: The number of the DSS keys is determined by the value of the parameter
“account.X.number_of_linekey”. It is not applicable to SIP-T19(P) E2/CP860/CP920 IP
phones.
Web User Interface:
Features->General Information->Auto Linekeys
Phone User Interface:
None
account.X.number_of_linekey
Integer
from 1 to
999
1
Description:
Configures the number of DSS keys to be assigned with Line type automatically from the

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English