Yealink SIP-T21 E2

Configuring Basic Features
245
Parameters
Permitted Values
Default
Enables or disables the IP phone to display contact avatar when it receives an incoming call,
dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T54S/T52S/T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when receiving
an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
0, 1, 2, 3 or 4
0
Description:
Specifies the call information display method when the IP phone receives an incoming call,
dials an outgoing call or is during an active call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:
Settings->Call Display->Call Information Display Method
Phone User Interface:
None