Yealink SIP-T21 E2

Configuring Basic Features
297
Configure a send tone or key tone.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-audio&q=load
Phone User Interface
Configure a send key.
Configure a key tone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.key_as_send
0, 1 or 2
1
Description:
Configures the "#" or "*" key as the send key.
0-Disabled
1-# key
2-* key
If it is set to 0 (Disabled), neither “#” nor “*” can be used as the send key.
If it is set to 1 (# key), the pound key is used as the send key.
If it is set to 2 (* key), the asterisk key is used as the send key.
Web User Interface:
Features->General Information->Key As Send
Phone User Interface:
Menu->Features->Others->General->Key As Send
features.key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a key tone when a user presses the keypad on pre-
dialing or dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Audio->Key Tone
Phone User Interface:
Menu->Basic->Sound->Key Tone
features.send_key_tone
0 or 1
1