Yealink SIP-T21 E2

Configuring Basic Features
337
Parameter
Permitted Values
Default
Directory->Setting->Directory
Phone User Interface:
None
To configure the directory via web user interface:
1. Click on Directory->Setting.
2. In the Directory block, select the desired list from the Disabled column and then
click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of list, select the desired list and then click or .
6. Click Confirm to accept the change.
The IP phone LCD screen will display the enabled list(s) in the adjusted order.