Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
344
Procedure
Backing up the call log file can be configured using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the IP phone to back up
the call log.
Parameters:
static.auto_provision.local_calllog.ba
ckup.enable
static.auto_provision.local_calllog.ba
ckup.path
static.auto_provision.local_calllog.wri
te_delay.terminated
Details of the Configuration Parameters:
Parameters
Permitted
Values
Default
static.auto_provision.local_calllog.backup.enable
0 or 1
0
Description:
Enables or disables the IP phone to upload the <MAC>-calllog.xml file to the server each
time the call logs update and download the <MAC>-calllog.xml file from the server during
auto provisioning.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone does not upload/download the call log file “<MAC>-
calllog.xml” to the server.
If it is set to 1 (Enabled), the IP phone uploads the call log file “<MAC>-calllog.xml” to the
specific path configured by the parameter “static.auto_provision.local_calllog.backup.path”
each time the call logs update; and downloads the call logs in the “<MAC>-calllog.xml”
according to its MAC address from the specific path during auto provisioning.
Note: It is not applicable to CP860 IP phones.
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.local_calllog.backup.path
String
Blank
Description:
Configures a path or URL for the IP phone to upload/download the <MAC>-calllog.xml file.