Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
364
3. Select the desired ring tone from the pull-down list of Ring.
4. Click Add to add the group.
To add a contact to the local directory via web user interface:
1. Click on Directory->Local Directory.
2. In the Contacts block, enter the name and the office, mobile or other numbers in the
corresponding fields.
3. Select the desired ring tone from the pull-down list of Ring Tone.
4. Select the desired group from the pull-down list of Group.
5. Select the desired account from the pull-down list of Account.
To Next Page
Loading...
Need help?
General