Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
392
2. Enter the desired time in the Auto Answer Delay(1~4s) field.
3. Click Confirm to accept the change.
To configure auto answer tone via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Enable Auto Answer Tone.
3. Click Confirm to accept the change.
To configure auto answer via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Select the desired line.
3. Press or , or the Switch soft key to select the desired value from the Auto
Answer field.
To Next Page
Loading...
