EasyManua.ls Logo

Yealink SIP-T21 E2

Yealink SIP-T21 E2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
16
to CP860 and CP920 IP phones).
- Basic Features: DND, auto redial, live dialpad, dial plan, hotline, caller identity, auto
answer.
- Advanced Features: BLF, server redundancy, distinctive ring tones, remote phone
book, LDAP.
Codecs and Voice Features
- Wideband codec: G.722, opus (opus is only applicable to SIP-
T54S/T52S/T48S/T46S/T42S/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP920 IP phones)
- Narrowband codec: G.711, G.726, G.729, iLBC, G723 (G723 is only applicable to SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27G/CP860/CP92
0 IP phones)
- VAD, CNG, AEC, PLC, AJB, AGC
- Full-duplex speakerphone with AEC
- Built in microphone array, 360 degree voice pickup ( applicable to CP860/CP920 IP
phones)
Network Features
- SIP v1 (RFC 2543), v2 (RFC 3261)
- NAT Traversal: STUN, TURN and ICE
- DTMF: INBAND, RFC 2833, SIP INFO
- Proxy mode and peer-to-peer SIP link mode
- IP assignment: Static/DHCP
- VLAN assignment: LLDP/Static/DHCP/CDP
- Bridge mode for PC port (not applicable to CP860/CP920 IP phones)
- HTTP/HTTPS server
- DNS client
- NAT/DHCP server
- IPv6 support
- Wi-Fi (only applicable to SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP920 IP phones)
Management
- FTP/TFTP/HTTP/PnP auto-provision
- Configuration: browser/phone/auto-provision
- Direct IP call without SIP proxy
- Dial number via SIP server
- Dial URL via SIP server
- TR-069
Security

Table of Contents

Other manuals for Yealink SIP-T21 E2

Related product manuals