Yealink SIP-T21 E2

Configuring Basic Features
455
Parameters
Permitted Values
Default
Menu->Features->Call Forward->Account X->No Answer Forward->No Answer Forward
account.X.timeout_fwd.target
String within 32
characters
Blank
Description:
Configures the destination number of the no answer forward for account X.
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
account.1.timeout_fwd.target = 3603
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to
SIP-T19(P) E2/CP860/CP920 IP phones.
Web User Interface:
Features->Forward&DND->Forward->Account X ->No Answer Forward->Target
Phone User Interface:
Menu->Features->Call Forward->Account X ->No Answer Forward->Forward to
account.X.timeout_fwd.timeout
Integer from 0 to
20
2
Description:
Configures ring times (N) to wait before forwarding incoming calls for account X.
Incoming calls will be forwarded when not answered after N*6 seconds.
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to
SIP-T19(P) E2/CP860/CP920 IP phones.
Web User Interface:
Features->Forward&DND->Forward->Account X->No Answer Forward->After Ring