Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
458
Parameters
Permitted Values
Default
Features->Forward&DND->Forward->Forward Authorized Numbers
Phone User Interface:
None
forward.always.enable
0 or 1
0
Description:
Triggers the always forward feature to on or off for the IP phone.
0-Off
1-On
If it is set to 1 (On), incoming calls are forwarded to the destination number (configured by
the parameter “forward.always.target”) immediately.
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
(except CP860 IP phones) and value of the parameter “features.fwd_mode” is set to 0
(Phone) (except SIP-T19(P) E2/CP860/CP920 IP phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Always Forward
forward.always.target
String within 32
characters
Blank
Description:
Configures the destination number of the always forward for the IP phone.
Example:
forward.always.target = 4608
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
(except CP860 IP phones) and value of the parameter “features.fwd_mode” is set to 0
(Phone) (except SIP-T19(P) E2/CP860/CP920 IP phones).
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Target
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Forward to
forward.always.on_code
String within 32
characters
Blank
Description:
Configures the always forward on code to activate the server-side always forward feature.