Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
478
Web User Interface
Configure feature key
synchronization.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-general&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
bw.feature_key_sync
0 or 1
0
Description:
Enables or disables feature key synchronization.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Feature Key Synchronization
Phone User Interface:
None
To configure feature key synchronization via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Feature Key Synchronization.
3. Click Confirm to accept the change.