Yealink SIP-T21 E2 Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
576
Procedure
USB Recording feature can be only configured using the configuration files.
Central
Provisioning
(Configuration File)
<y0000000000xx
>.cfg
Configure the recording feature on a phone
basis.
Parameter:
features.usb_call_recording.enable
Configure the automatic recording feature.
Parameter:
features.auto_recording.enable
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.usb_call_recording.enable
0 or 1
Refer to
the
following
content
Description:
Enables or disables the call recording feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can record the active audio call for the phone by pressing the
Start REC soft key, and the recorded calls will be saved to the USB flash drive.
For SIP-T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP860:
The default valu is 0.
For CP920:
The default value is 1.
Note: It is only applicable to SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP860/CP920 IP phones.
Web User Interface:
None
Phone User Interface:
None
features.auto_recording.enable
0 or 1
0
Description:
Enables or disables the call auto-recording feature for the IP phone.

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English