Yealink SIP-T21 E2 Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
620
Parameters
Permitted Values
Default
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.idle.idle.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor and monitored
user are idle.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.idle.idle.action = 1234$Tinvite$
Note: It is not applicable to SIP-T19(P) E2/CP860/CP920 IP phones. It works only if the
value of the parameter “blf.enhanced.idle.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.idle.callin.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor is ringing and
monitored user is idle.
Example:
blf.enhanced.idle.callin.action = newcall
Note: It is not applicable to SIP-T19(P) E2/CP860/CP920 IP phones. It works only if the
value of the parameter “blf.enhanced.idle.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.idle.talking.action
String
Blank

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English