Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
644
 Pick up
 Group Pick up
 Barge In (not applicable to SIP-T19(P) E2/CP860/CP920 IP phones)
 Retrieve
 Call Park
 Call Pull (not applicable to SIP-T19(P) E2/CP860/CP920 IP phones)
Procedure
The hide feature access codes feature can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure the hide feature access
codes feature.
Parameter:
features.hide_feature_access_codes.
enable
Web User Interface
Configure the hide feature access
codes feature.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-general&q=load
Details of Configuration Parameter:
Parameter
Permitted
Values
Default
features.hide_feature_access_codes.enable
0 or 1
0
Description:
Enables or disables the IP phone to display feature name instead of the feature access code
when dialing or in talk.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Hide Feature Access Codes
Phone User Interface:
None
To enable hide feature access codes feature via web user interface:
1. Click on Features->General Information.