Yealink SIP-T21 E2 Administrator's Guide

Getting Started
43
If you are using CP860 IP phones, and the phones are first powered on or the phone settings
are reset to factory defaults, the setup wizard will appear on the LCD screen after startup. If not,
go to the next step.
Note
3. The main LCD screen displays the following:
 Time and date
 Soft key labels
4. Press the OK/√ key or press Menu->Status to check the IP phone status, the LCD screen
displays the valid IP address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is ready
for use.
For more information on the setup wizard, refer to Yealink_CP860_User_Guide .

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English