Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
670
Parameters
Permitted Values
Default
Phone User Interface:
None
voice_mail.number.X
String within 99
characters
Blank
Description:
Configures the voice mail number for account X.
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Example:
voice_mail.number.1 = 1234
Web User Interface:
Account->Advanced->Voice Mail
Phone User Interface:
Menu->Message->Voice Mail->Set Voice Mail->AccountX Code
account.X.display_mwi.enable
0 or 1
1
Description:
Enables or disables the IP phone to present audio and visual MWI when receiving new voice
messages.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Note: It always works at the time of Unsolicited MWI; at the time of solicited MWI, MWI
subscription feature should be configured in advance. To present audio MWI, you also need
to set the value of the parameter “features.voice_mail_tone_enable” to 1 (Enabled) in
advance.