Yealink SIP-T21 E2

Configuring Advanced Features
719
Parameters
Permitted Values
Default
hotdesking.startup_outbound_enable
0 or 1
0
Description:
Enables or disables the IP phone to provide input field of outbound server on the logon
wizard during the first startup.
0-Disabled
1-Enabled
Note: It is not applicable to CP860/CP920 IP phones. It works only if there is no registered
account on the IP phone and the value of the parameter “phone_setting.logon_wizard” is
set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
To configure logon wizard feature via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Logon Wizard.
3. Click Confirm to accept the change.