Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
918
Parameters
Permitted
Values
Default
Phone User Interface:
None
To configure session report for VQ-RTCPXR via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of VQ RTCP-XR Session Report.
3. Click Confirm to accept the change.
To configure interval report for VQ-RTCPXR via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of VQ RTCP-XR Interval Report.
3. Enter the desired value in the Period for Interval Report field.