Yealink SIP-T2XP - Page 118

Administrator’s Guide for SIP-T2xP IP Phones
106
1 to 2 (for T20P)
Note: Multiple line IDs are separated by
comma.
Example
dialplan.area_code.line_id = 1,2
Parameter-
dialplan.block_out.number.x
Configuration File
<y0000000000xx>.cfg
Description
Specifies the block out numbers.
X ranges from 1 to 10.
Format
String
Default Value
Blank
Range
Not Applicable
Example
dialplan.block_out.number.1 = 0000
Parameter-
dialplan.block_out.line_id.x
Configuration File
<y0000000000xx>.cfg
Description
Specifies the desired line to apply this block
out rule.
X ranges from 1 to 10.
Format
Integer
Default Value
Blank (for all lines)
Range
Valid values are:
1 to 6 (for T28P)
1 to 3 (for T26P/T20P)
1 to 2 (for T20P)
Note: Multiple line IDs are separated by
comma.
Example
dialplan.block_out.line_id.1 = 1,2,3