Administrator’s Guide for SIP-T2xP IP Phones
8
In addition to the physical features introduced above, the SIP-T2xP IP phones also
support the following key features when running the latest firmware:
Phone Features
- Call Options: emergency call, call waiting, dial plan, call hold, call mute,
3-way conference, speed dial.
- Basic Features: DND, phone lock, auto redial, call transfer, hotline, call pickup,
call forward, calling party identity.
- Advanced Features: BLF/BLF list, shared call appearance, distinctive ring
tones, remote phonebook, SNMP, LDAP, 802.1x.
Codecs and Voice Features
- Wideband codec: G.722
- Narrowband codec: G.711, G.723.1, G.726, G.729AB
- VAD, CNG, AEC, PLC, AJB, AGC
- Full-duplex speakerphone with AEC
Network Features
- SIP v1 (RFC2543), v2 (RFC3261)
- NAT Traversal: STUN mode
- DTMF: INBAND, RFC2833, SIP INFO
- Proxy mode and peer-to-peer SIP link mode
- IP assignment: Static/DHCP/PPPoE
- Bridge/Router mode
- TFTP/DHCP/PPPoE client
- HTTP/HTTPS server
- DNS client
- NAT/DHCP server
Management
- FTP/TFTP/HTTP/PnP auto-provision
- Configuration: browser/phone/auto-provision
- Direct IP call without SIP proxy
- Dial number via SIP server
- Dial URL via SIP server
- TR-069
To Next Page
Loading...
Need help?
General