Getting Started
23
Dial-now is a string of characters that used to match the numbers dialed by the user,
when the dialed numbers match the predefined dial-now rule, the IP phone will
automatically dial out the numbers without pressing the send key. You can specify at
most 20 dial-now rules for the phone. You can create multiple dial-now rules using the
dial-now template and specify which phones are to use. For more information on the
dial-now template, refer to Dial-now Template on page 84.
Procedure
Dial-now rule can be created using the configuration files or locally.
Create the dial-now rule for the
phone.
For more information, refer to Dial
Plan on page 104.
Create the dial-now rule for the
phone.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
ConfigManApp.com?Id=12
For more information, refer to the
SIP-T2xP User Guide.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in one country. You can configure only one area code for the IP
phone. When dialing out numbers, the IP phone will automatically add the area code
before the dialed numbers. You can also specify the area code for the desired line and
the fixed lengths of the dialed numbers.
Procedure
Area code can be configured using the configuration files or locally.
Configure the area code and
specify the maximum and
minimum lengths of the dialed
numbers.
For more information, refer to Dial
Plan on page 104.
To Next Page
Loading...
Need help?
General