Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP IP Phones
24
Local
Web User Interface
Configure the area code and
specify the maximum and
minimum lengths of the dialed
numbers.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
ConfigManApp.com?Id=12
For more information, refer to the
SIP-T2xP User Guide.
You can block the IP phone to dial out some specific numbers by configuring block out
numbers. You can create at most 10 block out numbers. When dialing out the block out
number, the phone LCD screen prompts the message ―Forbidden Number‖.
Procedure
Block out number can be specified using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Specify the block out number for
the phone.
For more information, refer to Dial
Plan on page 106.
Local
Web User Interface
Specify the block out number for
the phone.
Navigate to:
http://<phoneIPAddress>/cgi-bin/
ConfigManApp.com?Id=12
For more information, refer to the
SIP-T2xP User Guide.