Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP IP Phones
62
The following table lists the variable values may be used when specifying the URL:
Variable
Description
$mac
MAC address of the phone
$ip
The current IP address of the phone
$model
Phone model
$firmware
Phone firmware version
$active_url
The SIP URI of the current account when the
phone is in the incoming, outgoing or connecting
state.
$active_user
The username of the current account when the
phone is in the incoming, outgoing or connecting
state.
$active_host
The host name of the current account when the
phone is in the incoming, outgoing or connecting
state.
$local
The SIP URI of the caller when the phone places a
call.
The SIP URI of the callee when the phone receives
an incoming call.
$remote
The SIP URI of the callee when the phone places a
call.
The SIP URI of the caller when the phone receives
an incoming call.
$display_local
The display name of the caller when the phone
places a call.
The display name of the callee when receives an
incoming call.
$display_remote
The display name of the callee when the phone
places a call.
The display name of the caller when the phone
receives an incoming call.
$call_id
The caller ID when in incoming, outgoing or
connecting state.
Procedure
Action URL can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the action URL on the
IP phone.
For more information, refer to
Action URL on page 150.