Yealink SIP-T2XP - Page 142

Administrator’s Guide for SIP-T2xP IP Phones
130
Format
String
Default Value
Blank
Range
Not Applicable
Example
account.1.direct_pickup_code = *68
Phone Basis
Parameter-
features.pickup.group_pickup_enable
Configuration File
<y0000000000xx>.cfg
Description
Configures the IP phone to display the
GPickup soft key in the dialing interface.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
features.pickup.group_pickup_enable =
1
Parameter-
features.pickup.group_pickup_code
Configuration File
<y0000000000xx>.cfg
Description
Configures the group pickup code on a
phone basis.
Format
String
Default Value
Blank
Range
Not Applicable
Example
features.pickup.group_pickup_code = *98
Per-account Basis
Parameter-
account.x.group_pickup_code
Configuration File
<y0000000000xx>.cfg
Description
Configures the group pickup code on a
per-account basis.
X ranges from 1 to 6.
Format
String