Yealink SIP-T2XP - Page 156

Administrator’s Guide for SIP-T2xP IP Phones
144
Parameter-
ldap.dial_lookup
Configuration File
<y0000000000xx>.cfg
Description
Configures the IP phone to query the LDAP
server when in the pre-dialing or the dialing
state.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
ldap.dial_lookup = 1
Parameter-
account.x.blf.blf_list_uri
Configuration File
<MAC>.cfg
Description
Specifies the URI that the IP phone uses to
access the BLF list configured on the BroadSoft
server.
X ranges from 1 to 6.
Format
String
Default Value
Blank
Range
Not Applicable
Example
account.1.blf.blf_list_uri = blf_3601
Parameter-
account.x.blf_list_code
Configuration File
<MAC>.cfg
Description
Enters the feature access code to pick up the
ringing call of the monitored user.
X ranges from 1 to 6.
Format
String
Default Value
Blank
Range
Not Applicable
Example
account.1.blf_list_code = *65