Yealink SIP-T2XP - Page 178

Administrator’s Guide for SIP-T2xP IP Phones
166
Parameter-
syslog.log_level
Configuration File
<y0000000000xx>.cfg
Description
Specifies the severity level of the logs to be
reported to a log file.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
Integer
Default Value
3
Range
0 to 6
Example
syslog.log_level = 2
Parameter-
watch_dog.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the Watch Dog feature.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
watch_dog.enable = 1
This section provides the DSS key parameters you can configure on the IP phone. The
DSS key is consist of the memory key and line key. The following table lists the number of
DSS keys you can configure for each phone model:
Phone Model
Line Key
Memory Key
T28P
6
10
T26P
3
10
T22P
3
/
T20P
2
/
Various key features can be assigned to the DSS key. The SIP-T28P/T26P IP phones
support to be assigned features to the memory keys and line keys. The SIP-T22P/T20P IP