Yealink SIP-T2XP - Page 189

Appendix
177
X ranges from 1 to 10.
Format
Integer
Range
Valid values are:
0 to 5 (for T28P)
0 to 2 (for T26P/T22P)
0 to 1 (for T20P)
Example
memorykey.3.line = 2
Parameter-
memorykey.x.value
Configuration File
<y0000000000xx>.cfg
Description
Specifies the number of the monitored user.
X ranges from 1 to 10.
Format
String
Range
Not Applicable
Example
memorykey.3.value = 1008
Parameter-
memorykey.x.pickup_value
Configuration File
<y0000000000xx>.cfg
Description
Specifies the pickup code for the BLF feature.
This parameter only applies to the BLF feature.
X ranges from 1 to 10.
Format
String
Default Value
Blank
Range
Not Applicable
Example
memorykey.3.pickup_value = *88
This section describes how the Yealink SIP-T2xP IP phones comply with the IETF definition
of SIP as described in RFC 3261.
This section contains compliance information in the following:
 RFC and Internet Draft Support
 SIP Request
 SIP Header