EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #389 background imageLoading...
Page #389 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
385
Values 1-Enabled, the phone can automatically answer the IP call.
Default
0
Web UI
Features > General Information > IP Direct Auto Answer
Parameter
features.auto_answer.first_call_only <y0000000000xx>.cfg
Description
It enables or disables the phone to only automatically answer the incoming call when the phone is
idle.
Note: It works only if “account.X.auto_answer or “features.ip_call.auto_answer.enable is set to 1
(Enabled).
Permitted
Values
0-Disabled. If there is an incoming call arrived when the phone is in a call or dialing, the phone will
automatically answer after you end the current call or cancel the dialing.
1-Enabled. The phone can only automatically answer the incoming call arrived when the phone is
idle. If there is an incoming call arrived when the phone is in a call or dialing, you have to manually
pick up the incoming call.
Default
1
Parameter
features.auto_answer_delay <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) before the phone automatically answers an incoming call.
Note: For the call coming from a SIP account, it works only if “account.X.auto_answer” is set to 1
(Enabled).
Permitted
Values
T48G/T46G/T42G/T41P/T29G:
Integer from 1 to 4
Other Phones:
Integer from 1 to 60
Default
1
Web UI
Features > General Information > Auto Answer Delay
Parameter
features.auto_answer_tone.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a warning tone when an incoming call is automatically
answered.
Note: For the call coming from a SIP account, it works only if “account.X.auto_answer” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features > General Information > Enable Auto Answer Tone
Parameter
features.auto_answer.ring_type <y0000000000xx>.cfg
Description
It configures a ring tone the phone plays before the incoming call is automatically answered.
Note: It works only if “features.auto_answer_tone.enable is set to 1 (Enabled).
Permitted
Values
0 (beep tone)
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (for example, Customring.wav)
For T3 phones:

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals