EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #390 background imageLoading...
Page #390 background image
Call Features
386
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Silent.wav, Splash.wav or custom ring tone name (for
example, Customring.wav)
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
features.custom_auto_answer_tone.enable <y0000000000xx>.cfg
Description
It configures the type of auto answer tone.
Note: It works only if “features.auto_answer_tone.enable is set to 1 (Enabled).
Permitted
Values
0-One beep
1-Double beep
Default
1
Parameter
features.mute.autoanswer_mute.enable <y0000000000xx>.cfg
Description
It enables or disables the auto answer mute feature.
Note: It works only if “account.X.auto_answer and “features.allow_mute are set to 1 (Enabled). It is
not available to the intercom call.
Permitted
Values
0-Disabled
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered,
and then the other party cannot hear you.
Default
0
Parameter
pstn.account.X.auto_answer
[2]
<MAC>.cfg
Description
It enables or disables the auto answer feature for PSTN account X.
Note: The IP phone cannot automatically answer the incoming call during a call even if the auto
answer is enabled.
Permitted
Values
0-Disabled
1-Enabled, the phone can automatically answer an incoming call.
Default
0
Supported
Devices
CP920
Web UI
Account > Basic > Auto Answer
Phone UI
Menu > Features > Auto Answer > Status
Parameter
pstn.account.X.auto_answer_mute_enable
[2]
<MAC>.cfg
Description
It enables or disables the auto answer mute feature for PSTN account X.
Note: It works only if the values of parameters “pstn.account.X.auto_answer” and “features.allow_
mute” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered,
and then the other party cannot hear you.
Default
0
Supported
Devices
CP920

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals