Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
496
3-PRID-PAI-FROM
4-PAI-RPID-FROM
5-RPID-FROM
6-PREFERENCE, the phone uses the custom priority order for the sources of caller identity (con-
figured by the parameter “sip.cid_source.preference”).
Default
0
Web UI
Account > Advanced > Caller ID Source
Parameter
account.X.cid_source_privacy
[1]
<MAC>.cfg
Description
It enables or disables the phone to process the Privacy header field in the SIP message.
Note: The priority order: PPI > Privacy > PRID/PAI/From.
Permitted
Values
0-Disabled, the phone does not process the Privacy header.
1-Enabled, the phone screen presents anonymity instead if there is a Privacy: id in the INVITE
request.
Default
1
Parameter
account.X.cid_source_ppi
[1]
<MAC>.cfg
Description
It enables or disables the phone to process the P-Preferred-Identity (PPI) header in the request mes-
sage for caller identity presentation.
Permitted
Values
0-Disabled, the phone does not process the PPI header.
1-Enabled, the phone presents the caller identity from the PPI header.
Default
0
Parameter
sip.cid_source.preference <y0000000000xx>.cfg
Description
It configures the priority order for the sources of caller identity information.
Note: Yealink phones can derive caller identity from the following SIP headers: From, P-Asserted-Iden-
tity (PAI), P-Preferred-Identity and Remote-Party-ID (RPID). It works only if “account.X.cid_source” is
set to 6 (PREFERENCE).
Permitted
Values
String
Default
P-Preferred-Identity, P-Asserted-Identity, Remote-Party-ID, From
Parameter
account.X.cp_source
[1]
<MAC>.cfg
Description
It configures the identity of the callee according to the response message.
Permitted
Values
0-PAI-RPID
1-Dialed Digits
2-RFC4916, the caller sends the SIP request message which contains the from-change tag in the Sup-
ported header. The caller then receives an UPDATE message from the server and displays the iden-
tity in the “From” header.
3-PAI-RPID-Contact
4-The phone displays the identity using the custom priority order configured by “sip.cid_source.-
preference”.
Default
0

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm