EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #537 background imageLoading...
Page #537 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
533
Description
It enables or disables the phone to support compact SIP header.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.custom_ua
[1]
<MAC>.cfg
Description
It configures the suffix of User-Agent in SIP request messages from the phone.
Permitted
Values
String within 256 characters
Default
Blank
Parameter
account.X.call_id_mode
[1]
<MAC>.cfg
Description
It configures the constitution of caller ID.
Permitted
Values
0-Use random digits
1Use the combination of the digits and letters
2Use random digits plus MAC address
Default
0
Parameter
account.X.path.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Supported:path header in the REGISTER request mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.insert_outbound_in_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add outbound server address as the topmost Route header in the
request message.
Note: It works only if the received 200 OK response for the REGISTER request contains the Service
route header.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.invite_with_rpid_header.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to add the Remote-Party-ID (RPID) header in the initial INVITE mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.third_part_request_with_route.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the Route header in the request message which is sent to
the third-party server (for example, a Music On Hold server).
Note: It works only if the received 200 OK response for the REGISTER request contains the Service

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals