EasyManuals Logo

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #538 background imageLoading...
Page #538 background image
Configuration Parameters
534
route header.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
sip.unreg_with_socket_close <y0000000000xx>.cfg
Description
It enables or disables the phone to close the socket immediately when the user deregisters the cor-
responding account(s).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.check_cseq.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to check if the CSeq sequence number in the request is lower than
that in the previous request on the same dialog.
Permitted
Values
0-Disabled
1-Enabled. If the CSeq sequence number in the request is lower than that in the previous request, the
phone will reject the request.
Default
1
Parameter
account.X.check_to_tag.enable
[1]
<MAC>.cfg
Description
It enables or disables the phone to check if the To-tag is carried in the To header in renewal request.
Permitted
Values
0-Disabled
1-Enabled. If the To-tag does not exist, the phone will reject the request.
Default
0
Parameter
features.call_invite_format <y0000000000xx>.cfg
Description
It configures the format of callee field in the INVITE message.
Permitted
Values
0-sip:XXX
1-tel:Number, you need to set “account.X.outbound_proxy_enable" to 1.
Default
0
Parameter
sip.escape_characters.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to convert ASCII code into corresponding symbol.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Case Scen-
ario
Target characters: %5F (escape character % plus the ASCII characters 5F)
1. If you want to convert the ASCII code, set the following:
sip.escape_characters.enable = 1
sip.reserve_characters = %NULL%
Result: The target characters %5F are converted to _.
2. If you do not want to convert the ASCII code, set the following:

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals