EasyManuals Logo

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
User Guide for the SIP-T40P IP Phone
112
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension (e.g., 4603) where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
- If the park retrieve code is configured, press the Retrieve soft key on the dialing
screen or retrieve park key (if configured) on the IP phone.
The phone will dial the configured park retrieve code and the Retrieve screen appears
as below:
2. Follow the voice prompt, do one of the following:
- Press on the phone where the call is parked.
- Enter the desired extension followed by # (e.g., 4603#) on any phone.
Note
Transfer Mode
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
You can also press the desired BLF or BLF list key to park a call or retrieve a parked call directly.
For more information, refer to Parking a Call/Retrieving a Parked Call to the Monitored User on
page 127.

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals