EasyManuals Logo

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Advanced Phone Features
137
The following describes 31 paging channels:
0: You can broadcast audio to channel 0. Note that the Yealink IP phones running old
firmware version (old paging mechanism) can be regarded as listening to channel 0. It is
the default channel.
1 to 25: You can broadcast audio to a specific channel. We recommend that you specify
these channels when broadcasting with Polycom IP phones which have 25 channels you
can listen to.
26 to 30: You can broadcast audio to a specific channel. We recommend that you specify
these channels when broadcasting with Yealink IP phones running new firmware version
(new paging mechanism).
The IP phones will automatically ignore all incoming multicast paging calls on the different
channel.
Sending RTP Stream
To configure a multicast paging key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Multicast Paging from the Key Type
field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
7. Enter the desired channel in the Channel field.
The valid channel ranges from 0 to 30.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
Multicast paging key is configurable via web user interface at the path Dsskey->Line Key.
To configure a paging list key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals