Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
94
Call Forward
You can configure your phone to forward incoming calls to another party (static forwarding).
You can also forward calls while your phone is ringing (dynamic forwarding).
Note
Static Forwarding
Three types of static forwarding:
 Always Forward: Incoming calls are immediately forwarded.
 Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
 No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
You can activate/deactivate call forward for the phone system, or you can customize call forward
for each or all accounts.
There are two call forward modes:
 Phone (default): Call forward is effective for the phone system.
 Custom: Call forward can be configured for each or all accounts.
To configure the call forward mode via web user interface:
1. Click on Features->Forward&DND.
When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.
You cannot activate or deactivate call forward when call forward feature is disabled. Contact your
system administrator for more information.

Yealink SIP-T40P Specifications

General

Wi-Fi	No
Quality of Service (QoS) support	Yes
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
Power consumption (typical)	3.23 W
Battery voltage	5 V
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.711, G.722, G.726, G.729A, G.729B
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	256 mm
Package width	620 mm
Package height	233 mm
Package weight	6400 g