EasyManuals Logo
Home>Yealink>IP Phone>SIP-T40P

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
User Guide for the SIP-T40P IP Phone
142
Using Multicast Paging
To send RTP stream via a multicast paging key when the receiver’s phone is idle:
1. Press the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port).
Both the sender’s and receiver’s phones play a warning tone and the receiver automatically
answers the multicast RTP session in the hands-free (speakerphone) mode.
The multicast paging key LED illuminates solid green.
The following figure shows a multicast RTP session on the phone:
2. You can do the following:
To place the current multicast RTP session on hold, press the Hold soft key.
The sender’s phone places the multicast RTP session on hold and receiver’s phone
releases the session.
To resume the held multicast RTP session, press the Resume soft key.
The multicast RTP session is established again.
To end the multicast RTP session, press the EndCall soft key.
Note
To send RTP stream via a paging key list when the receiver’s phone is idle:
1. Press the paging list key when the phone is idle.
2. Press or to select the desired paging group.
3. Press or the Paging soft key to send RTP.
4. Your can do the following:
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals